Why do so many of my recruitment emails bounce?
Most recruitment emails bounce because the address belonged to a job the person has since left. Why it happens, what it does to the rest of your email, and how to stop sending to dead addresses without losing real ones.
Most recruitment emails bounce because the address belonged to a job the person no longer has. A work address dies when its owner leaves, and a database built up over years is full of people who have moved on since they were added. The rest of the bounces come from typing mistakes, old personal addresses, companies that closed, and occasionally a sending domain that is not set up properly. You fix it by never sending to an address that has already failed, checking lists before campaigns, finding new addresses for the people worth reaching, and keeping cold outreach on its own domain.
What is an email bounce?
A bounce is a message the receiving mail server sends back to say your email was not delivered. Bounces come in three kinds, and each one is fixed in a different place.
| Type | What it means | Typical cause | What to do |
|---|---|---|---|
| Hard bounce | The address will never accept mail | The mailbox was deleted, the domain is gone, or the address was never real | Stop sending to it, then find a current address if the person matters |
| Soft bounce | The address exists but could not take this message now | Mailbox full, server busy, message too large | Nothing; it is retried. Repeated soft bounces from one address usually mean it is abandoned |
| Block or rejection | The receiving server refused you, not the address | Your domain is not authenticated, or it has a poor reputation | Fix your domain's setup and how you send; cleaning the list will not help |
When people say "half my emails bounce", they nearly always mean hard bounces from a campaign or a drip, where one send to an old list shows every dead address in the database at once.
Why do recruitment emails bounce more than most?
Recruitment databases bounce more because they hold more addresses that were tied to a job. A shop's customers give it the personal address they use every day. A recruiter's database is full of work addresses for client contacts and candidates, collected from CVs, signatures and LinkedIn over five or ten years, and each of those addresses stops working the day its owner changes employer.
Several other things add to it:
- Old CVs carry old addresses. A CV written at university or ten years ago can list an address its owner abandoned long since.
- Typing and parsing mistakes. A dropped letter in a domain or a stray space from a copied CV makes an address that never worked.
- Companies close, merge and rebrand. When a domain lapses, every address on it bounces.
- Imported lists. A spreadsheet from an old system or a bought list arrives with no history of which addresses still work.
Nothing on the record looks wrong. The address sits there, correctly formatted, until the day you email it.
Why does a high bounce rate matter?
It matters because Gmail, Outlook and every other mail provider judge your domain by how your email is received. A domain that keeps sending to addresses that do not exist looks like a sender that does not know its recipients, and its mail is pushed toward the spam folder.
The damage is not limited to the campaign that bounced. If your campaigns go out from the same domain as your recruiters' everyday email, a bad list can make an interview confirmation to a candidate or a CV to a client land in spam. Google's own email sender guidelines set out what a sender has to do to stay trusted, from authenticating its domain to keeping spam complaints low and making it easy to unsubscribe.
Which check catches which kind of bounce?
No single check catches all of them. Recruitly gives you five tools, and the chart shows where each one works.
How do I see which of my emails bounced?
Open the Email Blacklist in Marketing. Every address that hard-bounced, unsubscribed or complained is listed there, each marked with its type, and you can search it and remove an address you know is good. A candidate, contact or lead whose main address bounced carries a badge on its marketing preferences, so a recruiter sees it on the record before reaching for that address.
Your campaign results show how many emails bounced on each send. A sudden jump after sending to a list you have not used for a while is the clearest sign that the list, not your setup, is the problem.
How do I stop sending to dead email addresses?
Recruitly stops it at three points: after an address fails, before a campaign goes out, and as records arrive.
Every hard bounce is blacklisted automatically
The first time an address hard-bounces, it goes on the Email Blacklist and every campaign and drip skips it from then on. You never pay the reputation cost of the same dead address twice. One-to-one emails from a recruiter still send, because a person writing to one address is making a choice.
Email List Clean-up checks a list before you send to it
Email List Clean-up is one of Simi's Agent Tasks on a Loop Channel. Turn it on for the channel you send campaigns to and pick monthly or weekly. Simi checks every address in the channel and moves the bad ones to the Email Blacklist with the reason: no mail server, a domain that does not exist, a disposable address, or an invalid address. When the day's checks are done, one card in the channel says who was moved and why. Emma shows it in how to clean your email list automatically before every campaign.
It is built so a wrong answer cannot quietly cost you a list:
It checks the domain and the address, not the mailbox, so it cannot tell that a particular person has left a company whose domain still works. That address is caught by the bounce blacklist on the first send, or before sending by a mailbox-level check.
A mailbox-level check with NeverBounce
If your agency has a NeverBounce account, connect it in the Marketplace with your own key. Recruitly then checks addresses with it before marketing campaigns and drip steps, and skips the ones it says are undeliverable. It asks the receiving server whether the mailbox exists, which is the one check that catches a person who has left. NeverBounce charges you for its checks directly.
Clean addresses as records arrive
The Data Agent's email clean-up checks the format of every address and flags disposable domains. Run it on a schedule against new records, and the impossible addresses from a mistyped form or a badly parsed CV never reach a campaign.
How do I find a working email for someone whose address bounced?
Look them up again from where they work now. On a candidate, contact or lead, ⋮ › Enrich with Recruitly finds a work email for $0.15, a personal email for $0.25 or a phone number for $0.25, charged only when one is found. For many records at once, the grid's Actions › Enrich with Recruitly sends them to the Data Agent at the same prices.
If your agency already pays for Apollo, Lusha or FullEnrich, connect it in the Marketplace and their buttons appear on the record and in the grid, spending your own credits with them. On LinkedIn, the Recruitly Chrome extension reveals a person's work and personal email and phone from the side panel and saves them to the record.
A bounced work address usually means the person changed jobs, which is worth knowing for its own sake. How to know when a candidate changes jobs covers hearing about it before the bounce.
Should I send cold outreach from my main domain?
No. First emails to people who do not know you get fewer replies than email to people who do, and mail providers judge a domain by how its email is received. An outreach domain is a second domain with a name close to yours, used only for first contact, so your main domain keeps the reputation your everyday email depends on.
Recruitly sets one up for you from Marketing › Settings › Domains and Senders › Get outreach domain. It suggests names, shows today's price for each, registers the domain in your company's name, creates a mailbox for each recruiter (Google Workspace, Microsoft 365 or Recruitly mailboxes), and sends anyone who visits the domain to your website. A new domain starts gently, a few emails a day, building up over about a week. Recruitly checks the domain every hour, limits how many each person sends a day, adds an unsubscribe link to every outreach email, and pauses sending if anything is not being delivered well. Replies come straight back to each recruiter. The full walk-through is in how to send cold email from an outreach domain.
How do I know my domain is set up to send?
Your domain needs three records in its DNS. SPF says which services may send email as your domain. DKIM signs every email so a receiver can tell it was not changed or faked. DMARC tells receivers what to do with email that fails those checks. Without them, a growing share of your email is rejected or filtered whatever the state of your list.
Marketing › Settings › Domains and Senders lists the records each of your sending domains needs, with what each one does, for you or your IT person to add. Outreach domains bought through Recruitly are set up for you and checked every hour.
What routine keeps bounces down?
Bounces stay low when checking the list is part of sending, rather than a clean-up after a bad campaign.
| When | What | In Recruitly |
|---|---|---|
| Before every campaign | Make sure the list has been checked in the last month | Email List Clean-up on the channel you send to |
| Every send | Never send twice to an address that hard-bounced | Automatic: the bounce goes on the Email Blacklist and campaigns and drips skip it |
| When adding records | Catch impossible and disposable addresses as they arrive | Data Agent email clean-up on a schedule |
| When someone matters | Replace a dead address with a working one | Enrich with Recruitly, or your Apollo, Lusha or FullEnrich account |
| Once | Keep first-contact outreach off your main domain | An outreach domain |
| Once, then on any change | SPF, DKIM and DMARC in place for every domain you send from | Marketing › Settings › Domains and Senders |
How much does it cost?
| What | Price |
|---|---|
| Bounce blacklist | Free, automatic |
| Email List Clean-up | $0.0015 an address checked. Addresses already on the blacklist are skipped and not charged, and an address is checked at most once a day. It has its own monthly cap, separate from your email credits. 5,000 addresses checked monthly is $7.50 a month |
| Data Agent email clean-up | Part of the $0.005 a record clean-up |
| Enrich with Recruitly | Work email $0.15, personal email $0.25, phone $0.25, only when found |
| NeverBounce, Apollo, Lusha, FullEnrich | Your own account with them; Recruitly charges nothing |
| Outreach domain | The domain and mailboxes are shown with today's price before you buy, as an add-on on your Recruitly bill |
Current prices are on the pricing page.
What is a good email bounce rate?
As close to zero as you can get for hard bounces. Most email sending services treat a hard-bounce rate above about 2% as a warning sign, and a campaign where one email in ten bounces is a list that needs checking before it is used again.
Will cleaning my list remove real candidates?
It is built not to. Email List Clean-up only blacklists an address for one of four specific reasons, holds back a result that looks like a fault at one provider, and never adds back an address a person has taken off the blacklist. An address that starts passing again is taken off automatically.
Do bounces affect my recruiters' normal emails?
They can, if campaigns and everyday email share a domain, because mail providers judge the domain. Keep campaigns to checked lists and first-contact outreach on an outreach domain, and your recruiters' own email keeps its reputation.
Can I still email a blacklisted address one to one?
Yes. The Email Blacklist stops campaigns and drips. A recruiter's own one-to-one email still sends, and the badge on the record warns them the address has bounced before.



